LTS LTN8932-R User Manual Download

Page: 100 / 203

User Manual of 89XX-R Series NVR

a required thumbnail to enter the full-screen playback.

The thumbnail view is supported only in the 1X single-camera playback mode.

6.2.3

Fast View

You can hold the mouse to drag on the time bar to get the fast view of the video files.

Steps:

Enter the playback interface and start to play the video files.

Figure 6. 24

Playback Interface

Use the mouse to hold and drag through the playing time bar to fast view the video files.

Release the mouse to the required time point to enter the full-screen playback.

The fast view is supported only in the 1X single-camera playback mode.

6.2.4

Digital Zoom

Steps:

Click the

button on the playback control bar to enter Digital Zoom interface.

You can zoom in the image to different proportions (1 to16X) by moving the sliding bar from

You can also scroll the mouse wheel to control the zoom in/out.

Summary of Contents for LTN8932-R












































































































































































































Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands

LTS LTN8932-R, User Manual

Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands