LTS LTN8932-R User Manual Download

Page: 136 / 203

User Manual of 89XX-R Series NVR

135

With the configured VCA detection, the NVR supports the VCA search for the behavior analysis, face capture,
people counting and heat map results.

10.1

People Counting

Purpose:

The Counting is used to calculate the number of people entered or left a certain configured area and form in

daily/weekly/monthly/annual reports for analysis.

Steps:

Enter the Counting interface.

Menu>VCA Search>Counting

Select the camera for the people counting.

Select the report type to Daily Report, Weekly Report, Monthly Report or Annual Report.

Set the statistics time.

Click the

Counting

button to start people counting statistics.

Figure 10. 1

People Counting Interface

You can click the

Export

button to export the statistics report in excel format.

Summary of Contents for LTN8932-R












































































































































































































Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands

LTS LTN8932-R, User Manual

Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands