LTS LTN8932-R User Manual Download

Page: 77 / 203

User Manual of 89XX-R Series NVR

5.7

Configuring Redundant Recording and

Capture

Purpose:

Enabling redundant recording and capture, which means saving the record files and captured pictures not only in

the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and reliability. .

Steps:

Enter HDD Information interface.

Menu> HDD

Figure 5. 23

HDD General

Select the

HDD

and click

to enter the Local HDD Settings interface.

Set the HDD property to Redundancy.

Figure 5. 24

HDD General-Editing

Click

Apply

to save the settings.

Click

to back to the upper level menu.

You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to

Redundant. For detailed information, please refer to

Chapter 11.4.1 Setting HDD Property

. There should be at

least another HDD which is in Read/Write status.

Enter the Record setting interface.

Menu> Record> Parameters

Summary of Contents for LTN8932-R












































































































































































































Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands

LTS LTN8932-R, User Manual

Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands