LTS LTN8932-R User Manual Download

Page: 124 / 203

User Manual of 89XX-R Series NVR

123

8.5

Handling Exceptions Alarm

Purpose:

Exception settings refer to the handling action of various exceptions, e.g.

•

HDD Full:

The HDD is full.

•

HDD Error:

Writing HDD error or unformatted HDD.

•

Network Disconnected:

Disconnected network cable.

•

IP Conflicted:

Duplicated IP address.

•

Illegal Login:

Incorrect user ID or password.

•

Record/Capture Exception:

No space for saving recorded files or captured images.

•

Hot Spare Exception:

Disconnected with the working device.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter Setting Alarm Response Actions

for detailed alarm response actions.

Figure 8. 12

Exceptions Setup Interface

Summary of Contents for LTN8932-R












































































































































































































Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands

LTS LTN8932-R, User Manual

Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands