LTS LTN8932-R User Manual Download

Page: 59 / 203

User Manual of 89XX-R Series NVR

Figure 4. 11

PTZ Panel - One-touch

Click

Linear Scan

button to start the linear scan and click the Linear Scan button again to stop it.

You can click the

Restore

button to clear the defined left limit and right limit data and the dome needs to

reboot to make settings take effect.

4.2.9

One-touch Park

Before operating this function, make sure the connected camera supports the linear scan and is in protocol.

Purpose:

For some certain model of the speed dome, it can be configured to start a predefined park action (scan, preset,

patrol and etc.) automatically after a period of inactivity (park time).

Steps:

Click the button

PTZ

in the lower-right corner of the PTZ setting interface;

Or press the PTZ button on the front panel or click the PTZ Control icon

in the quick setting bar to

enter the PTZ setting menu in live view mode.

Click the

button to show the one-touch function of the PTZ control.

Figure 4. 12

PTZ Panel - One-touch

There are 3 one-touch park types selectable, click the corresponding button to activate the park action.

Summary of Contents for LTN8932-R












































































































































































































Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands

LTS LTN8932-R, User Manual

Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands