LTS Security LTD3216C-PL, User Manual

Page: 68 / 353

Local Configurations 58
You can also configure encode settings by selecting Main Menu > CAMERA > ENCODE >
Encode .
Step 1 After you have configured the P2P settings, on the P2P interface, click Next .
The Encode interface is displayed. See Figure 5-27.
Figure 5-27
Step 2 Configure the settings for the main/sub streams parameters. See Table 5-6.
Table 5-6
Parameter Description
Channel
In the Channel list, select the channel that you want to configure the
settings for.
Smart Codec
Enable the smart codec function. This function can reduce the video
bit stream for non-important recorded video to maximize the storage
space.
Type

Main Stream: In the Type list, select General , MD (Motion
Detect), or Alarm .

Sub Stream: This setting is not configurable.
Compression
In the Compression list, select the encode mode.

H.265: Main profile encoding. This setting is recommended.

H.264H: High profile encoding. Low bit stream with high
definition.

H.264: Main profile encoding.

H.264B: Baseline profile encoding. This setting requires higher bit
stream compared with other settings for the same definition.
Resolution
In the Resolution list, select resolution for the video.
The maximum video resolution might be different dependent on your
device model.
Frame Rate
(FPS) Configure the frames per second for the video. The higher the value
is, the clearer and smoother the image will become. Frame rate