LTS Security LTD3216C-PL User Manual Download Page 102

Page: 102 / 353

Local Configurations

5.4.3.4 Configuring AutoScan

Step 1 On the Expanded PTZ Control Panel, click

The

PTZ

interface is displayed.

Step 2 Click the

Border

tab.

The

Border

interface is displayed. See Figure 5-61.

Figure 5-61

Step 3 Click the direction arrows to position the left and right borders.

5.4.4 Calling PTZ Functions

After you have configured the PTZ settings, you can call the PTZ functions for monitoring from
the Expanded PTZ Control Panel. See Figure 5-62.

Figure 5-62

5.4.4.1 Calling Presets

Step 1 On the Expanded PTZ Control Panel, in the

No.

box, enter the value of the preset that

you want to call.

Step 2 Click

to call the preset.

Step 3 Click

again to stop calling the preset.

Summary of Contents for LTD3216C-PL


































































































































































































































































































































































Search results

Summary of Contents for LTD3216C-PL

Reviews:

Brands by name

Popular brands

LTS Security LTD3216C-PL, User Manual

Search results

Summary of Contents for LTD3216C-PL

Reviews:

Brands by name

Popular brands