LTS Security LTD3216C-PL Page 16 User Manual Download

Page: 16 / 353

Getting Started

4. Turn the device to see the

back side of it. Align the
screws of the HDD with the
holes on the back of the
device, and then fix the
screws.

5. Use the HDD cable and

power cable to connect
HDD and mainboard.

6. Put back the cover and

fix the screws.

2.2.4 Cooper 1U

1. Remove the screws on

the cover.

2. Connect HDD cable and

power cable to HDD, and
fasten the screws in HDD.

3. Align the screws of the

HDD with the holes on
the back of the device.

4. Turn the Device upside

down and then fasten
the screws.

5. Connect the HDD cable

and the power cable to the
mainboard.

6. Put back the cover and

fasten the screws.

2.2.5 1U

1. Remove the screws on

the cover.

2. Fix the screws onto the

HDD, but do not be
fastened.

3. Put the HDD into the

Device.

Summary of Contents for LTD3216C-PL


































































































































































































































































































































































Search results

Summary of Contents for LTD3216C-PL

Reviews:

Related manuals for LTD3216C-PL

Brands by name

Popular brands

LTS Security LTD3216C-PL, User Manual

Search results

Summary of Contents for LTD3216C-PL

Reviews:

Related manuals for LTD3216C-PL

Brands by name

Popular brands