Function and Operation
The DORAN 360M has 3 kinds of pressure units (PSI, KPa and Bar), as shown in the
Figures below:
Above pictures show the display in Baseline programming mode.
a. Press the S button to switch the pressure unit between PSI, KPa and Bar.
b. When the unit of measure you need appears on the display, press the P button for
5 seconds
to confirm the unit of measure. The system will move to the
END
mode.
Above pictures show the display as it appears when programming the pressure unit.
5. END Mode
Under END mode, pressing the P button will allow the system to
exit the programming modes and return to the Normal Operation
mode. If no buttons are pressed the monitor will automatically
return to normal operation mode.
14