LSIS XGL-PMEA, User Manual, Page: 19 / 191

Chapter 1 Introduction
1 - 5
1.4.2 XG5000
XG5000 is software tool dedicated for the communication module including Pnet I/F module. Setting
the basic parameter, writing the frame and network diagnosis are available for the communication
module. Fore more detail, refer to Ch5. XG5000.
The following figure is an initial screen of the XG5000
[Figure 1.4.1] XG5000 initial screen
1.4.3 Checking the version
Before using the Pnet I/F module, check the version of the module
(1) Check through the XG5000
This is method reading the communication module information through online connection
If it is under normal interface with the CPU, you can get the information as follows.
a) Execute the XG5000
b) Connect to the CPU through “Connect” on the “Online” menu.
c) After connection, execute [Online]-[Communication module setting]-[System Diagnosis]
d) In the “System Diagnosis” screen, select “Module Information” by double-clicking the
communication module and pop-up window
e) Software information appears at the right-bottom.