3 - 7
27 Engine Speed Cruise control(ESC) indicator
This indicator is turned on when operating ESC
main switch to ON position and Engine Speed
Cruise control(ESC) is ready.
28 Vehicle control error warning indicator
29 Air cleaner service indicator
27
29
28
26
26 Stop lamp indicator
If there is any significant error on vehicle control,
This indicator shall be ON. Contact your
authorized local dealer for check.
If there is any significant error on vehicle control, This indicator shall be ON. Contact your authorized
local dealer for check.
If the air cleaner element is clogged, and the differential pressure is increased, this indicator shall be
ON.
After stopping the engine, clean or replace the filter element with a new one.
23 DPF Regeneration indicator
When the regeneration process in the DPF is
working, this indicator shall be turned on with
continuous light. It is not a failure but normal
operation.
If this indicator is blinking, it means that the
soot is over accumulated in the DPF. Comply
with the instructions of the chapter 3-1-(8),
“DPF switch” .
For further information about this indicator, See
page 3-13.
24 DPF regeneration inhibited indicator
When the DPF switch is pressed to
Inhibited regeneration mode
, this indicator shall be ON and
the regeneration of the DPF shall be halted.
25 Exhaust gas temperature high indicator
When the regeneration process in the DPF is working and the DPF temperature is over the
designated temperature, this indicator shall be turned on with continuous light.
24
23
25
22 Fuel filter warning indicator
When there is a restriction or excess water in the fuel filter, this indicator shall be ON.
Remove water in the fuel filter.
(See chapter 5-5-(1) in this manual)
22
