4 - 1
7. Check if engine oil
pressure indicator,
battery charging
indicator is OFF. If any
of these indicators are
ON, stop the engine
immediately and check.
8. Run engine for a few
minutes to allow engine oil
and transmission oil to
warm up.
4. Operation and Work
4-1. Engine start and stop
(1) Engine start
Throttle pedal
Shuttle lever
Range gear
shift lever
▶
Check each part before starting engine.
▶
Check if there is some other people
around the tractor before starting.
▶
Place the lever and switch in
NEUTRAL
or
OFF
position.
1. Sit in the driver’s
seat and check if
the parking brake
is applied.
2. Place the main gear shift, range
gear shift lever, shuttle lever in
NEUTRAL
and PTO switch in
OFF
position.
3. Pull the throttle lever to
the low speed position.
4. Turn the key switch to
ON and check if engine
oil pressure indicator,
battery charging
indicator, cold start aid
indicator is ON.
5. Wait until the cold start
aid indicator is OFF.
(about 10 seconds)
6. Depress clutch pedal
fully and turn key switch
to
START
position. As
soon as the engine has
been started, release
the key switch to go to
the ON position.
Main gear
shift lever
Throttle lever
Caution
Brake pedal
Clutch pedal
PTO gear lever
