5 - 26
(2) Checking Nozzle injection pressure
Contact your authorized local dealer for check.
Normal injection pressure (Common rail) : 180MPa (26100 psi)
(3) Adjusting Engine valve
clearance
Ask your authorized dealer to check the valve
clearance.
Normal : 0.25mm (0.0098 in)
If the gap is large, valves makes a loud tapping
noise and if the gap is too small, it is hard to
compress by which the engine output falls down
or burns a valve.
Valve clearance
5-10. Every 1000hr or 1-year check
Primary
element
Evacuator valve
Safety filter
element
(1) Replacing Air cleaner element
(Dry type)
If the air-cleaner service indicator in the
instrument panel is turned on, make sure to
check and/or replace the filter element
regardless of recommended service intervals in
this maintenance chart.
Remove the cover and pull the primary element
straight out, ensuring the safety filter element
remains in place.
Clean the inside of the air cleaner housing using
a clean damp cloth, taking care not to damage
the safety element.
Check if there is damage inside filter element by using a light. If finding tiny crack or small holes in
the filter element or the gasket is damaged, change it with a new one.
Insert the filter element by pushing it deeply into the filter housing.
Remove the dust of the evacuator valve and clean the inside of the cover.
Assemble the cover with the evacuator valve placed downward.
▶
Do not start the engine or close the hood if the filter element is not assembled..
Notice