Chapter 11. Monitoring
11-3
11.2
Monitoring I/O Terminal
z
Input terminal status monitoring
Group
Code Parameter Name
Setting
Range
Initial
Unit
PG Group
P71
Input terminal status display
-
Current input terminal status (ON/OFF) can be monitored in P71.
The following is displayed when P1, P3, P4 are ON and P5 is OFF.
11.3
Monitoring Fault Condition
z
Monitoring Current Fault Status
Group
Code Parameter Name
Setting
Range
Initial
Unit
Drive Group
nOn
Current fault display
-
Fault occurred during operation is displayed in nOn
Up to 3 kinds of faults can be monitored.
This parameter gives information on fault types and the operating status at the time of the fault in good
order of fault type -> frequency -> current -> accel/decel. Refer to Page 5-10 for keypad setting.
Frequency
Current
Fault during accel
Fault during decel
Fault during constant run
Fault types
Accel/decel
information
Fault at a stop
Refer to Page 13-1 on fault types.
ON
OFF
P5 P4 P3 P2 P1
Summary of Contents for SV-iE5 Series
Page 124: ...iV ...