LS ELECTRIC XGL-EFMF, User Manual

Page: 236 / 364

Chapter 7 server service
7-9
Variable Position Device Function Description
- Bit26 F0001A - -
- Bit27 F0001B - -
_PB1 Bit28 F0001C Program code 1 Program code 1 is being executed
_PB2 Bit29 F0001D Program code 2 Program code 2 is being executed
_CB1 Bit30 F0001E Compile code 1 Compilation code 1 is being executed
_CB2 Bit31 F0001F Compile code 2 Compilation code 2 is being executed
4) _CNF_ER
Operation stop error related error flag collectively displayed
Variable Type Device Function Description
_CPU_ER Bit F00020 CPU configuration error
If normal operation is not possible due to self-diagnosis
error of CPU module
_IO_TYER Bit F00021
Module type mismatch
error
If the configuration of the mounting module and the I / O
parameters of each slot are different
_IO_DEER Bit F00022 Module detachment error
Detects when the module configuration of each slot is
changed during operation
_FUSE_ER Bit F00023 Fuse cutoff error
Detect when the fuse of the module with the fuse of
each slot is broken
_IO_RWER Bit F00024 I/O module read/write error
An error occurs when the I / O module among the
modules in each slot cannot be read / written normally.
_IP_IFER Bit F00025
Special / communication
module
Interface error Normal connection is not possible due to malfunction of
special / communication module among modules in
each slot.
_ANNUM_ER Bit F00026
Significant error detection
in external device
Fault detection when a failure of external device is
detected by user program and recorded in ANC_ERR
[n]
- Bit F00027 - -
_BPRM_ER Bit F00028 Basic parameter error Check basic parameters to see if they are abnormal
_IOPRM_ER Bit F00029 I/O parameter error Check the I / O parameter to see if it is abnormal
_SPPRM_ER Bit F0002A
Special module parameter
error Check Special module parameter to see if they are
abnormal
_CPPRM_ER Bit F0002B
Parameter error in
communication module
Check Communication module parameter to see if they
are abnormal
_PGM_ER Bit F0002C Program error Check user program to see if there is any problem
_CODE_ER Bit F0002D Program Code error
Occurs when an uninterpretable command is
encountered while executing a user program
_SWDT_ER Bit F0002E System watchdog error Occurs when the system watchdog is exceeded
_BASE_POWER_E
R
Bit F0002F Power error Occurs when there is an error in the base power supply
_WDT_ER Bit F00030 Scan watchdog
Occurs when the scan time of the program exceeds the
Scan Watchdog Time specified by the parameter.
- -
F00031
F0003F
- -