7
To install a cartridge into the AirMap,
first make certain the unit is turned
off.
Never install or remove a cartridge with the unit turned on! You
can damage your unit if you install or remove a cartridge with the unit
turned on. Next, pry the cover off the back of the unit. Place the cartridge
into either slot with it’s label facing you as shown at the bottom of the
previous page. Now slide the cartridge towards the top until it stops. Re-
place the cover.
The C-Map cartridges cover most of the world with detailed views of coastal
and some inland waters. Over 600 cartridges are available.
The Jeppesen
®
database cartridge contains the location of VOR’s, NDB’s,
intersections, and airports. It also has airport information such as runway
length and widths, frequencies, fuel availablity, and more. These car-
tridges can be updated every 28 days. See page 80 for Jeppesen data-
base update information.
REMOVING A CARTRIDGE
If you have difficulty removing a cartridge, use the back cover as a re-
moval tool. Simply press one side of the cover against the ridge on the
cartridge and gently push towards the bottom of the unit. Don’t use a
corner of the cover - it could damage it.
IMPORTANT!
If you unplug the Jeppesen cartridge and turn the AirMap on, or if you
swap your Jeppesen cartridge for a newer one,
all routes are erased!
No
waypoints will be erased - only routes. Make certain to write down any
stored routes before swapping cartridges.
Summary of Contents for AirMap
