Lorex E861AB-E User Manual Download Page 98

Page: 98 / 122

Connecting Remotely using the
Mobile App

You can connect to your security system over the Internet using our free app for iOS and An-
droid devices. Securely connect to your system from anywhere with no recurring fees for live
viewing.

The app allows you to

•

View live video from cameras

•

Play back recorded video from the hard drive

•

Manually record video clips or take a snapshot of live video

•

Activate deterrence features including warning lights and sirens*

•

Set preferences for push notifications, informing you of motion detection and other system
events

For full setup instructions and advanced support for the app,

click here

to open the Lorex Home

instruction manual.

* On supporting devices.

#LX400117; r. 6.0/57895/57895; en-US

Summary of Contents for E861AB-E



























































































































Search results

Summary of Contents for E861AB-E

Reviews:

Related manuals for E861AB-E

Brands by name

Popular brands

Lorex E861AB-E, User Manual

Search results

Summary of Contents for E861AB-E

Reviews:

Related manuals for E861AB-E

Brands by name

Popular brands