5. Click
Set
next to
Area
to set an active area for automatic deterrence.
•
The camera image appears with a grid overlay. The green area is the active area for
deterrence.
•
Click or click-and-drag to add / remove boxes from the active area.
•
In the example image above, only motion around the garage or on the porch will trigger
the warning light.
•
Right-click when finished.
6. Click
Set
next to
Schedule
to set the weekly schedule for automatic deterrence.
•
Click or click-and-drag along each of the yellow timelines to quickly add or remove time
from each day’s schedule in 15–minute segments.
•
Click
beside 2 or more days to link schedules (
). This allows you to quickly
change multiple schedules at once.
•
To make fine adjustments to a schedule, click
Set
. This will allow you to set exact start
and end times for a schedule.
•
Click
OK
when finished.
7. Configure preferences for the warning light:
•
Duration:
Choose how long the warning light will stay on when motion is detected.
•
Select
Warning Light
for a solid white light, or
Strobe
for a flashing light. If you select
Strobe
, set how quickly the light will flash under
Strobe Frequency
.
#LX400117; r. 6.0/57895/57895; en-US
41
