Lorex E861AB-E User Manual Download Page 75

Page: 75 / 122

NOTE

Port forwarding is not required unless you are using DDNS for remote access. Using mobile apps does not re-
quire port forwarding or DDNS setup.

To configure system ports:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

, then click

NETWORK

. Click the

Port

tab on the side panel.

3. Configure the port numbers as needed.
4. Click

Apply

to save changes.

NOTE

Up to 3 devices may connect to the system at the same time.

16.4.3

Configuring IP Filter

Configure permissions for external IP addresses attempting to access the unit.

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

#LX400117; r. 6.0/57895/57895; en-US

Summary of Contents for E861AB-E



























































































































Search results

Summary of Contents for E861AB-E

Reviews:

Related manuals for E861AB-E

Brands by name

Popular brands

Lorex E861AB-E, User Manual

Search results

Summary of Contents for E861AB-E

Reviews:

Related manuals for E861AB-E

Brands by name

Popular brands