Lorex E861AB-E User Manual Download

Page: 95 / 122

Using the Main Menu

2. Click

, then click

SYSTEM

. Click the

UPGRADE

tab on the side panel.

3. Click

Browse

4. Click on the

.bin

firmware file for your recorder.

5. Click

Start

16.4.22

Automatic Firmware Upgrades

Firmware upgrades provide enhanced functionality. The system will automatically check for
firmware upgrades if it is connected to the Internet.

To configure automatic firmware upgrade:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

, then click

SYSTEM

. Click the

UPGRADE

tab on the side panel.

3. Ensure

Automatically Check for Updates

is checked. If it was previously unchecked, click

to save changes.

#LX400117; r. 6.0/57895/57895; en-US

Summary of Contents for E861AB-E



























































































































Search results

Summary of Contents for E861AB-E

Reviews:

Related manuals for E861AB-E

Brands by name

Popular brands

Lorex E861AB-E, User Manual

Search results

Summary of Contents for E861AB-E

Reviews:

Related manuals for E861AB-E

Brands by name

Popular brands