Loren Cook HVAD 2020, Installation & Operation Manual

Page: 33 / 40

33
HMI/CAT 5 CABLE CONNECTION HMI/CAT 5 CABLE CONNECTION
22.8m of Cat 5 cable is supplied to connect
the HMI to the fan. This is a simple “plug and
play” application once the cable is ran. Level
and install HMI within reach of the 22.8m
CAT 5 cable using supplied fasteners. It is
recommended the fan remain in line of site of
the HMI.
HVAD HMI CONTROL HMI CONTROL
The bottom left button toggles ‘Light’ to ‘Fan’ depending on what
functionality you are looking to set or adjust. When the screen says
‘Fan’, the remaining buttons on the keypad are controlling just the fan.
When the screen says ‘Light’, the remaining buttons on the keypad are
controlling just the light.
The center button is the on/off control. This button controls both the fan
& light, however; they are controlled separately depending on which
functionality the interface is showing.
The top left button only works when the interface is controlling the ‘Fan’.
HMI Control HMI Control