Loren Cook HVAD 2020, Installation & Operation Manual

Page: 21 / 40

21
OWSJ MOUNT OWSJ MOUNT
1. Insert two 3/8” X 9” long thread rod with welded nut
(EN823X8313) through the studded mounting plate pointing
upward. Place the studded mounting plate against bottom face
of OWSJ and place through bottom web of OWSJ directing the
threaded rods between the bottom web angles.
2. Place the other mounting plate (EN562X1100) over top of
the bottom web angles and thread two 3/8” nylock nuts
(EN823X6999) onto threaded rod with welded nuts.
3. Tighten to sandwich assembly to bottom web of the OWSJ.
4. Continue on to “Installing the Motor Assembly”.