Loren Cook HVAD 2020, Installation & Operation Manual

Page: 17 / 40

17
GLU-LAM MOUNT GLU-LAM MOUNT
1. From an accessible landmark, on the glu-lam, measure to the
centre line of the bottom centered hole of the 3 mounting holes.
2. Drill the centered bottom mounting hole with a ½” drill bit, so
that there will be a minimum of ¾” (19mm) between the top of
the (EN562X1152) mounting bracket deck and the bottom of the
glu-lam.
3. Place the two (EN562X1152) mounting bracket faces one on
each side of the glu-lam with each mounting bracket bottom
deck face inward.
4. Before fastening the mounting brackets install four ¼” x 1-1/4”
long hex cap screws (EN823X6031) with ¼” flat washers
(EN823X6905) into mounting bracket deck facing down.