manualshive.com logo in svg

Loren Cook HVAD 2020, Installation & Operation Manual

Share
Download
Loren Cook HVAD 2020 Installation & Operation Manual Download Page 14

14

ITEMS INCLUDED

ITEMS INCLUDED

•  (1) EN575X0010 HVAD Motor Assembly
•  (5) HVAD Blades (Optional Color)
•  (1) EN561X3660 HVAD LF/SP Assembly
•  (1) EN561X6205 Packaged Assembly Hardware
•  (1) EN561X3570 Packaged HMI Control
•  (1) EN561X3635 Packaged Wire Harness
•  (1) EN561X3675 HVAD LED Light Kit (Or Lens)                                       
•  (1) Hub Cover (Optional Color)  

HARDWARE INCLUDED

HARDWARE INCLUDED

•  (1) EN562X1100  HVAD Mounting Plate
•  (2) EN562X1152  HVAD Mounting Brackets 
•  (3) EN823X8313  3/8 x 9” B7 Threaded Rod W/ Nut
•  (2) EN022X1022  Hex Cap Screw 3/8” X 3”
•  (5) EN823X6999  3/8 Nylocks
•  (10) EN823X6381  3/8 Flat Washers 
•  (20) EN823X6030  ¼ x 5/8 Serrated Flange Head Cap Screw
•  (5) EN823X6119  #8-32 x 1 3/8 Machine Screw                        
•  (1) EN823X6955  1/8” Cable Clamp                                      
•  (1) EN562X2510  Studded Mount Assembly

Summary of Contents for HVAD 2020









































Reviews:

No comments

Brands by name

Popular brands

Load more brands