Loren Cook HVAD 2020, Installation & Operation Manual

Page: 31 / 40

31
POWER WIRING – 120/240 VAC 1 PHASE INPUT POWER WIRING – 120/240 VAC 1 PHASE INPUT
1. Ensure all local electrical codes are met.
2. The motor is to be field-wired to a separate dedicated branch
circuit.
3. The power cable must be
secured to a solid point of
the glu-lam, purlin, OWSJ,
wood truss or building
structure. The power cable is
to be fastened so there is absolutely no slack in line, in order to
allow the safety disconnect to function as designed.
4. The location of the input power (line) is labelled on the
enclosure and should be drilled to accommodate the
appropriate gauge of wire required in accordance with the
electrical codes and standards.
5. The input power (line) will be wired into the HVAD LF/SP
assembly (EN561X3660) as shown in the following illustration.
6. The outgoing power (load) that is coming out of the HVAD
LF/SP Assembly (EN561X3660) and going to the HVAD fan
(EN575X0010) must also be wired as shown in the following
illustration.