22
5. Operating the Cobra 3.1
If data via DMX, Artnet or sACN stops, the
Cobra 3.1
switches to the Standby-Mode after 10
Seconds. The heating element will be switched
off, the screen turns black. A dot appears in the
right lower corner.
You can also activate the Standby-Mode by
pressing
SETTINGS 2
—>
STANDBY
. You can inter-
rupt the process by pressing
BACK
or
STANDBY
to switch directly to the Standby-Mode.
— Standby
You can adjust the brightness of the back-
ground lighting.
Press
SETTINGS
at the main screen, on the fol-
lowing Settings 1-screen
NEXT
and on the Settings
2-screen
BRIGHTNESS
.
Press
PLUS
or
MINUS
to change the value.
Save the value with
BRIGHT SAVE
.
Press
BACK
to get to the previous screen
without saving the value.
— Brightness
Fig. 21 Settings 3-screen
To open the Settings 3-screen, press
SETTINGS
at the main screen and on the following
Settings 1- and Settings 2-screens press
NEXT.
The shown screen appears.
5.4.7.2 Settings 3
