18
5. Operating the Cobra 3.1
5.4.5.2 sACN
Fig. 14 Screen with activated sACN-Button
Fig. 15 Screen for configuring sACN
Press
sACN
(Fig. 14). The button changes its colour to cyan, showing its active mode.
You can adjust the Universe.
– Press
MODIFY
(Fig. 14). The screen on the right appears (Fig. 15).
Corresponding to the standards for DMX and sACN a Universe consists of 512 DMX-
channels. In sACN there are Universes between 1 and 63999.
– Press
CE
(Fig. 15) and type in the value for the selected Universe.
–
sACN UNIVERSE SAVE
saves the value,
BACK
switches back to the previous screen
(Fig. 14) without saving the value.
– Now press
PROTOCOL SAVE
(Fig. 14) to save your sACN adjustments.
If you press
BACK
, you will get back to Settings or the main screen without saving
the value.
Make sure that the
Cobra 3.1
has a valid network address and a correct subnet mask.
You can check and change this by pressing
SETTINGS
–>
IP-CONFIG
(see chapter 5.4.6).
