15
5. Operating the Cobra 3.1
5.4.4 Operating via DMX
Press
DMX
(Fig. 8, line 1) on the main screen or choose
SETTINGS
–>
DMX
. The
Keyboard-screen (Fig. 9 ) appears. The DMX-address can be typed in.
Save the adjustments by pressing
DMX ADDRESS SAVE
. If you press
BACK
, you will
get back to the main screen without saving the adjustments.
Fig. 8 DMX-Mode active
Fig. 9 Keyboard-screen
Choose one of two possible Modes:
1.
DIRECT
for e.g. Look XLR-Remote or any other 0 - 10V remote:
The connected XLR-Remote regulates the fog output between 0 and the adjusted
FOG-value.
– When using the XLR-Remote, the fogging process can be started by pressing the
on/off-Button on the XLR-Remote.
– When using the Radio Remote, the start button on the transmitter has to be pressed
and held during the fogging process.
LATCHED
:
Switching on and off via short impulse with e. g. push-button or Radio Remote. The
FOG value has to be adjusted at the machine.
– When using the Radio Remote, the button at the transmitter has to be pressed and
released. A second impulse stops the fogging process.
Save the adjustments by pressing
ANALOG SAVE
. If you press
BACK
, you will get back
to the main screen without saving the adjustments.
Please note
: If the machine has been started in the
LATCHED
-mode, it must be
stopped in the same mode. Switching into a different mode is actually not possible.
