17
5. Operating the Cobra 3.1
5.4.5 Operating via Ethernet
Press
ETH
at the main screen (Fig. 1, line 1) or select
SETTINGS
–>
PROTOCOL
. Screen
(Fig. 12/13) appears.
5.4.5.1 Artnet
Select
ARTNET
. The button will change its colour to cyan, showing that Artnet is
activated.
Fig. 12 Screen with activated ARTNET-Button
Fig. 13 Screen for configuring ARTNET
You can adjust the Net, Subnet and the Universe.
– Therefore press
MODIFY
(Fig. 12). The screen shown on the right (Fig. 13) appears.
Corresponding to the standards for DMX and ARTNET, a Universe consists of 512
DMX-channels. A Subnet contains 16 Universes and a Net 16 Subnets. There are 128 Nets.
– Select
NET
,
SUBNET
or
UNIVERSE
(Fig. 13, line 1), to change the respective value.
Press
CE
and type in the new value.
– Pressing
ARTNET CONFIG SAVE
saves the values,
BACK
switches back to the previous
screen (Fig. 12) without saving the value.
– Press
PROTOCOL SAVE
(Fig. 12) to save the ARTNET adjustments.
If you press
BACK
, you will get back to Settings or the main screen without saving
the values.
