9
HT Nucleofector™ power supply
The HT Nucleofector™ power supply generates and delivers the electrical
programs to the plate handler and mediates the data transfer between
the computer and the plate handler. It is connected to the plate handler
via two cables.
7. Main switch with status LED
8. Main power inlet
9. Fuse holders with fuses
10. Lonza interface (HV port)
11. Lonza interface (data port)
12. Ethernet port
Figure 2.3: HT Nucleofector™ power supply
7
8
10
9
12
11
HT Nucleofector™ plate handler
The HT Nucleofector™ plate handler serves as the contacting unit of the
system. Transfection of the samples occurs in 384-well Nucleocuvette™
plates that are loaded onto the carousel of the plate handler.
13. Lonza interface (HV port)
14. USB host (for firmware update)
15. USB port for PC connection
16. Ethernet port
17. Lonza interface (data port)
Figure 2.4: Plate handler connections
Plate handler front
18. Status LED from the left: power on (green); boot status (green);
error (red); plate status (blue)
19. Plate carousel
20. Plate retainer position
Figure 2.5: Plate handler front view
13
17
15
14
16
18
20
19
2
