31
If a reversing alarm device is installed, make sure
it is in normal working condition.
1.5.4 CHECK AFTER ENGINE STARTING UP AND BEFORE MACHINE
OPERATION
If there is no proper and timely check after the engine starts up, it is likely that the
abnormal condition of the machine cannot be identified in time, thus causing personal
injury or machine damage.
Check work shall be performed in a spacious place where there is no obstruction. No
other person is allowed to approach the machine during checking.
Check whether the instruments and equipment, bucket, lift arm, brake system, power train
system and steering system are in normal working conditions.
Check whether the sound, vibration, heat, smell or instrument are in abnormal conditions;
check the leakage of hydraulic oil, lubricant, gas or fuel.
If any abnormal condition has been identified, please immediately adjust or repair it to
normal condition. Otherwise, it may cause injury accidents or machine damage.
Before the machine is traveling or working, check the frame fixing rods that are used to
lock front and rear frames, the frame fixing rods should be in a position of “release”.
Before operating the machine, heat the oil of engine, hydraulic tank and torque converter
to normal working temperature.
Remove all obstacles on the machine’s running path.
Keep window clean, and make sure all windows are in a safe opening or closing position.
Adjust the rearview mirror to the best field vision, make sure horns, alarms and other
warning devices are in a good working condition.
