54
1.8.20PREVENTION MEASURES OF MAINTENANCE IN HIGH
TEMPERATURE OR HIGH PRESSURE
When the machine just stops working, cooling water and oil of all parts of engine is in high
temperature and high pressure. If now open the engine hood to do drain of oil, water or to
replace filter, this may lead to burn or other injuries. It is needed to wait for the
temperature drop, and then conduct repair according to requirements in the User Manual.
1.8.21 WASTE DISPOSAL
In order to prevent pollution, especially in place lived with people or animals, must comply
with the following requirements:
Prohibit waste oil to dump into drainages and
rivers and other places.
Discharged oil from the machine should be
placed in containers, do not discharge the oil
directly onto the ground.
When dealing with hazardous substances
such as lubricants, fuel, coolant, solvents,
filters, batteries and other substances, it is
necessary to comply with relevant laws and
regulations.
1.8.22 PRECAUTIONS OF TIRE MAINTENANCE
Tire filled with gas explodes for the inner gas is
overheated, commonly due to heat from welding
or wheels rim, external fire or brake too often. Tire
explosion is so powerful which can cause tire,
wheel rim, and eventually transmission parts
flying 500 meters away from the machine.
Explosive force and fragments of the explosion
can lead to casualties and property damage.
Equipments and staff are needed to avoid
over-inflation. Leakage or rim damage is due to
the incorrect or improper use of inflatable
equipment. When inflating tire, you should stand
on the side and use automatic working clamp.
Danger may exist during maintenance and replacement of tire or wheel rim, as a
result it requires trained personnel to operate strictly according to operation
specifications provided by maintenance personnel of tire or wheel rim or the dealer.
