LONCIN LX200AU-2 Manual Download Page 4

Page: 4 / 65

IMPORTANT NOTICE

Off-road vehicle riding is a wonderful sport, and we hope you will enjoy it to the fullest.

This vehicle is designed and manufactured for off-road use only. It is illegal and unsafe to

operate this vehicle on any public road, street and highway.

This vehicle complies with all applicable off-road noise and spark arrester laws and regu-

lations in effect at the time of manufacture. Please check your local riding laws and regulations

before operating this vehicle.

Read this manual carefully and completely before starting your new ATV

It contains important safety information. Never operate this ATV without proper instruction.

Beginner should take a training course before operating this vehicle.

Never allow a child under the age 16 to operate this ATV. Use of this ATV by children under

16 years of age can lead to severe injury of death of the child. Even youths starting at age 16

may not have the skills, abilities, or judgment needed to operate this ATV safety. Therefore

youths starting at age 16 should have adult supervision even after they attend a training course.

To protect your safety, make sure you use your vehicle legally, show concern for the environment,

and respect the rights of other people.

Summary of Contents for LX200AU-2


































































Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands

LONCIN LX200AU-2, Manual

Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands