LONCIN LX200AU-2 Manual Download Page 1

Page: 1 / 65

FOREWORD

Thanks for purchasing ATV

LX200AU-2

. This manual includes important safety information.

It provides information about special techniques and skills necessary to ride this vehicle. It also

includes the details to operate and necessary maintenance procedure to perform safely.

IMPORTANT SAFETY MESSAGE:

●

PAY ATTENTION TO THE CAUTION AND WARNING LABELS ON THIS ATV.

●

READ THIS MANUAL BEFORE OPERATING THIS ATV. MAKE SURE YOU UNDERSTAND ALL

INSTRUCTION. ALSO KEEP ALL INFORMATION IN MIND WHILE OPERATING THIS ATV.

●

ANYONE UNDER AGE 16 SHOULD NEVER BE ALLOWED TO OPERATE ATV LX200AU-2.

●

KEEP THIS MANUAL IN THE WATERPROOF PLACTIC BAG AND STORED IN THE COMPART-

MENT PROVIDED BY YOUR ATV.

●

FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERI-

OUS INJURY OR DEATH.

●

NEVER CARRY A PASSENGER ON THIS ATV.

Summary of Contents for LX200AU-2


































































Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands

LONCIN LX200AU-2, Manual

Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands