LONCIN LX200AU-2 Manual Download Page 6

Page: 6 / 65

OPERATION ...............................................6-1

Starting a cold engine ..................................6-1

To start out and accelerate ...........................6-2

To decelerate ..............................................6-2

Engine break-in ...........................................6-2

Parking ......................................................6-2

Loading ......................................................6-3

RIDING YOUR ATV .....................................7-1

Know you ATV before riding .........................7-1

Ride with gare and judgment ........................7-1

Apparel ......................................................7-2

Pre-operation checks ..................................7-2

Speed limiter ..............................................7-3

Loading and accessories .............................7-3

During operation ..........................................7-4

Exhaust system .........................................7-5

Be careful where you ride .............................7-5

Turning you ATV .........................................7-8

Climbing uphill .............................................7-9

Riding downhill ...........................................7-11

Crossing a slope ........................................7-12

Crossing through shallow water ...................7-13

Riding over rough terrain ..............................7-14

Sliding and skidding ...................................7-14

What to do of if ..........................................7-14

What to do ................................................7-15

PERIODIC MAINTENANCE AND

ADJUSTMENT ............................................8-1

Owner’s manual and tool kit ..........................8-1

Maintenance schedule .................................8-2

Checking the spark plug ..............................8-4

Engine oil and oil filter element .....................8-5

Engine oil level measurement .......................8-5

Engine oil replacement ................................8-6

Drive chain .................................................8-6

Drive chain slack adjustment ........................8-7

Lubricating the drive chain ............................8-7

Air filter cleaning .........................................8-8

Air intake restrictor plate removal ..................8-8

Carburetor adjustment .................................8-8

Summary of Contents for LX200AU-2


































































Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands

LONCIN LX200AU-2, Manual

Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands