LONCIN LX200AU-2 Manual Download Page 26

Page: 26 / 65

function, inspect the brake for wear and the level

of the brakes fluid.

2.Brake pedal and brake levers

Check the correct free play in the brake pedal

and brake levers. Adjust it if the free play is

incorrect.

WARNING

POTENTIAL HAZARD

Failure to check the ATV before operating.

Failure to maintain the ATV properly.

WHAT CAN HAPPEN

It could cause an accident or equipment

damage.

HOW TO AVOID THE HAZARD

Always check your ATV carefully each time be-

fore your use it to be sure the ATV is in safe

operation condition.

Always follow inspection and maintenance pro-

cedure as shown in the owner’s manual

Brakes

1.Brake operation

Test the brakes at slow speed after starting to

make sure they are working properly. If any of

the brakes does not provide proper braking

WARNING

POTENTIAL HAZARD

Improperly operating brakes while riding.

WHAT CAN HAPPEN

The braking ability could lose and cause an ac-

cident

HOW TO AVOID THE HAZARD

Always check the brakes every time before you

start to ride. Do not ride the ATV if you find there

is any problem with the brakes. Find your dealer

to inspect it if you cannot correct the problem

by yourself according to the adjustment proce-

dures provided in this manual.

5-2

Summary of Contents for LX200AU-2


































































Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands

LONCIN LX200AU-2, Manual

Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands