before attempting larger hills.
●
Always follow proper procedures for climbing hills as described in this manual. Check the terrain
carefully before you start up any hill. Never climb hills with excessively slippery or loose surfaces.
Shift your weight forward. Never open the throttle suddenly or make sudden gear changes. Never go
over the top of a hill at high speed.
●
Always use the size and type tires specified in this manual. Always maintain proper tire pressure as
described in this manual.
●
Never attempt to operate over large obstacles, such as large rocks or fallen trees. Always follow
proper procedures when operating over obstacles as described in this manual.
●
Always use proper procedures if you stall or roll backwards when climbing a hill. To avoid stalling,
use proper gear and maintain a steady speed when climbing a hill. If you stall or roll backwards,
follow the special procedure for braking described in this manual. Dismount on the uphill side or to
a side if pointed straight uphill. Turn the ATV around and remount, follow the procedure described in
this manual.
●
Always be careful when skidding or sliding. Learn to safety control skidding or sliding by practicing
at low speeds and on level, smooth terrain. On extremely slippery surface, such as ice, go slowly
and be very cautious in order to reduce the chance of skidding or sliding out of control.
●
Never operate an ATV in fast flowing water or in water deeper than the recommended in this manual.
Remember that wet brakes may have reduced stopping ability. Test your brakes after leaving water.
If necessary, apply them several times to let friction dry out the linings.
1-3
Summary of Contents for LX200AU-2
