LONCIN LX200AU-2 Manual Download Page 2

Page: 2 / 65

IMPORTANT NOTICE TO PARENTS AND ADULTS

●

THIS ATV IS NOT A TOY.

●

YOU SHOULD UNDERSTAND THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL BE-

FORE YOU LET YOUR CHILD RIDE THIS ATV. THEN BE SURE YOUR CHILD UNDERSTANDS

AND WILL FOLLOW THEM.

●

THIS ATV SHOULD ONLY BE OPERATED UNDER THE DIRECT SUPERVISION OF AN ADULT.

●

NEVER EXCEED YOUR RIDING CAPABILITIES.

●

THIS ATV CAN BE HAZARDOUS TO OPERATE, AVOID EXCESSIVE SPEED, PAVED

SURFACES, SHARP TURNS, AND UNEVEN TERRAIN.

●

ADULTS SHOULD ADJUST THE THROTTLE FOR SLOWER SPEEDS.

●

NEVER RIDE THIS ATV DURING LOW LIGHT CONDITIONS.

●

CHILDREN DIFFER IN SKILLS. SOME CHILDREN MAY NOT BE ABLE TO OPERATE AN ATV

SAFETY. PARENTS SHOULD PERMIT CONTINUED USE ONLY IF THEY DETERMINE THAT

THE CHILD HAS THE ABILITY TO OPERATE THE ATV SAFETY.

●

IF YOUR CHILD IS INEXPERIENCED IN RIDING ATV, HE OR SHE SHOULD TAKE A TRAINING

COURSE BEFORE OPERATING THIS ATV.

Summary of Contents for LX200AU-2


































































Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands

LONCIN LX200AU-2, Manual

Search results

Summary of Contents for LX200AU-2

Reviews:

Related manuals for LX200AU-2

Brands by name

Popular brands