LONCIN LX200AU-2, Manual

Page: 24 / 65

NOTE:
Always make sure the seat is securely fitted.
Seat
To remove the seat, pull up the seat at the rear.
To install the seat,insert the projections on the
front of the seat into the holder on the rear of the
fuel tank, and push down on the seat at the rear
when the locks on the rear of the seat aim at the
support cushion under the seat.
4-8
Improperly installing the seat could be hazardous.
Failing to install the seat properly could allow the seat
to move and cause the rider to lose control.
Make sure you are in proper position and that the seat
is attached securely when you ride.
Drive select lever
The drive select lever is used to shift your ma-
chine into the forward, neutral, reverse positions.
NOTE:
Never shift your machine when you still don’t
stop your ATV, and never press the throttle level
when you are shifting your machine. otherwise
the engine can be damaged.