LOHBERGER Aqua Insert+P, Operating Manual

Page: 24 / 36

Appliance OFF 13:45
Burner OFF
Output<|| || | || || | || || | || || | || || | || || | ---->
Appliance ON 13:45
APPLIANCE CLEANING
Output<|| || | || || | || || | || || | || || | || || | ---->
Appliance ON 13:45
SPECIAL CLEANING
Output<|| || | || || | || || | || || | || || | || || | ---->
Appliance ON 13:45
APPLIANCE MAINTENANCE
Output<|| || | || || | || || | || || | || || | || || | ---->
page 24
28. External Release / Remote control unit
(to be provided by the customer)
28. External Release / Remote control unit
(to be provided by the customer)
Press the button once in the top level of the menu.
the display
Appliance OFF
and the operating status
Burner OFF
ap-
pear (Figure 59).
the appliance shuts down.
It is also possible to switch the pellet burner on or off by means of a remote
control unit.
the burner is released through a normally open contact on the main circuit
board. Without a remote control unit this contact must be bridged (condition
as supplied to the customer).
the remote control unit is connected to the main circuit board to replace the
bridge. no additional software activation is necessary.
For operation with a remote control unit the burner needs to be activated, in
the menu top level “appliance On” must appear. When the remote control unit
switches on, the burner starts with the appropriate ignition programme, depen-
ding on the flame temperature. When the remote control unit switches off, the
burner switches off automatically after a delay of 5 minutes and waits for the
next command from the remote control unit.
• The appliance must be switched on (Appliance ON) and the desired heating
output must be pre-set.
• If the remote control unit switches off, the burner continues to run for approx.
5 minutes
• The appliance must be switched on (Appliance ON) and the desired heating
output must be pre-set.
• If the remote control unit switches off, the burner continues to run for approx.
5 minutes
The appliance can switch on automatically at any
time.
Therefore we recommend installing a smoke or
fire detector that makes a warning sound in an
emergency and interrupts the power supply of the
appliance. The appliance can switch on automatically at any
time.
Therefore we recommend installing a smoke or
fire detector that makes a warning sound in an
emergency and interrupts the power supply of the
appliance.
29. Switching the appliance off 29. Switching the appliance off
30. Maintenance /Cleaning display 30. Maintenance /Cleaning display
display Cleaning
the display aPPlIanCe CleanIng appears after 250 operating hours (Figu-
re 60). after the cleaning work has been performed, the display is reset by
using the service code CleanIng and timing restarts for the next cleaning. For
details how to reset the service code, please refer to the service code item on
page 19.
display special cleaning
the display sPeCIal CleanIng appears after several fault states have occurred
in succession, such as
NO PELLETS, NO IGNITION OR LOADING DOOR OPEN
(Figure 61).
this display indicates a possible problem caused by dust or dirt that has ac-
cumulated in the appliance. remove deposits from the appliance, in particular
from the pellet burner block, by means of the supplied cleaning brush. then
press and hold the
OK
button for two seconds to clear the displayed mes-
sage.
display maintenance
the display
APPLIANCE MAINTENANCE
appears after 2000 operating hours. a full
service of the appliance is then necessary (Figure 62).
the servicing must be carried out by a trained service technician. Please get in
touch with your local dealer. this maintenance checks all installed components
and ensures that they are working well. Once the maintenance work has been
completed, the display will be reset by the service technician with the service
code
MAINTENANCE
, and timing for the maintenance period restarts.
We offer you the option of an annual maintenance contract. If you wish to take
advantage of this service, please do not hesitate to contact the customer service
department of LOHBERGER
®
.
We offer you the option of an annual maintenance contract. If you wish to take
advantage of this service, please do not hesitate to contact the customer service
department of LOHBERGER
®
.
Figure 59
Figure 60
Figure 62
Figure 61
• Before starting the burner or operating the appliance with firewood, check
the level in the reservoir.
• If the reservoir is full, the heat output to water cannot be dissipated or
only be dissipated for a short time. This can lead to disturbances through
the system constantly switching off in pellet operation and the thermal
discharge safety valve may be triggered when the system runs on firewood.
• Before starting the burner or operating the appliance with firewood, check
the level in the reservoir.
• If the reservoir is full, the heat output to water cannot be dissipated or
only be dissipated for a short time. This can lead to disturbances through
the system constantly switching off in pellet operation and the thermal
discharge safety valve may be triggered when the system runs on firewood.