Configure Ethernet Network IP Address
The Agility Controller's Ethernet network is configured on this page. Before attempting to alter these settings
you should have a
firm
understanding of how networks function and how each setting affects the network. It is
beyond the scope of the document to provide the required documentation or training for this complicated
topic. If you are unfamiliar with network configuration, have your IT department configure this device.
The Default button forces the network configuration back to the factory-configured settings.
The Agility Controller's MAC Address is shown at the bottom of the page. This is sometimes needed by IT
personnel.
Eth0 IP Address
Enter the unique IP address for this device. For example, 10.0.100.200
Eth0 Subnet Mask
Enter the Subnet Mask for this device. For example, 255.0.0.0
Eth0 Broadcast Mask (optional)
Enter the Broadcast Mask for this device. If unknown or not required, enter 0.0.0.0
Eth0 Gateway
Enter the Gateway address for this device. For example, 10.0.100.1
