Agility Password Setpoints
Password Security Overview
The Agility Controller features a built-in password mechanism to prevent unauthorized changes to the
controller. The controller supports up to ten unique user names and passwords. While setting up passwords is
not required, it is strongly recommended. Password protection is enabled when at least one user is set
up. This requires a user to be signed in with the appropriate level password to change setpoints or
acknowledge safeties.
Setpoint Page Password Security
Each setpoint page is pre-configured with a unique minimum password access level required to modify the
settings. When a setpoint page or menu selection is accessed, Agility will prompt the user to sign in, if not
already. If a valid user name and password is not entered, the page's settings will still be displayed, allowing
observation but not modification.
Setup Passwords
To access the Setup Passwords page, from the Secure Access menu, select Setup Passwords and provide a
top level password when prompted.
The
User ID
field contains the user's public name and/or ID. The
Password
field contains the user's secret
password required to access the system. The
Access Level
field contains the user's system access level
with 1 as the most restrictive through 8 as the least restrictive. Passwords can be any combination of letters,
numbers and/or punctuation with a maximum of 15 and minimum of 4 characters in length. Similarly,
the User ID can be any combination of letters, numbers and/or punctuation up to a maximum of 12 characters
in length.
Signing In and Out
From the Secure Access menu, select Sign In or Sign Out. A user will be automatically signed out after
there has been no activity in the Agility page for longer than 10 minutes.
