18
GB
Cleaning
Always unplug the appliance before you start cleaning.
• Clean the motor unit with a damp cloth. Do not immerse the motor unit in water and do not rinse it either.
• Immediately after use, always clean the parts that have come into contact with food, using hot water and
washing liquid.
Certain ingredients may cause discolourations on the surface of the accessories. This does not have a negative
effect on the accessories. The discolourations usually disappear after some time.
Blender jar cleaning
1. Pour lukewarm water (not more than 0.5 litres) and some washing liquid into the blender jar.
2. Close the lid.
3. Let the appliance run for a few seconds by turning to Pulse (P) function.
4. Detach the blender jar and rinse it with water.
Blade cleaning
The slicing / shredding plate and knife blade can be cleaned in warm soapy water or in the dishwasher.
Clean the blades and plates very carefully. Their cutting edges are very sharp!
Hints and Tips
What is a Pulse Function?
The pulse control is used when you need short bursts of power at the optimum speed. This is controlled by the
user which means you control how long the appliance will run. It is a useful way of avoiding over-processing. For
example, it can be used to fold fruit into a cake mixture at the end of processing.
What is the difference between a Food Processor and a Breadmaker?
A Breadmaker is primarily for mixing dough and cake mixtures. A Food Processor can do these jobs but not with
the efficiency of a Breadmaker. If you are planning on making cakes you should consider how often you will be
doing this job. If it is going to be a common occurrence then a Breadmaker would be a better choice.
Why won’t my processor or blender switch on?
Check if the bowl or the blender is properly positioned and locked on the motor unit. The appliance will not
function if neither are properly positioned on the motor unit.
Can I process hot ingredients?
Hot liquids (not boiling) and hot foods can be processed in the bowl.
L700FP14E_IB_140408_grace.indd 18
8/4/14 7:11 pm
