4
- Multiple sockets or extensions do not guarantee the necessary
safety (fire hazard). Do not use these devices to connect the hob to
the mains.
- For safety reasons, the hob must only be used after it has been
recessed.
- Contact with live parts or changes to electrical or mechanical
structures can endanger the user and cause malfunctions in the hob.
Never under any circumstances open the casing of the appliance.
- The appliance is not intended for operation with an external
programmer clock or with a remote control system.
- The hob must be connected to the electric network by an electrician.
If the damaged power cord is replaced, a suitable power cord must
be installed by an electrician.
- To carry out installation, maintenance or repair work, disconnect the
hob from the power supply. The appliance is disconnected from the
power supply only if:
- the fuse of the electrical system is switched off,
or
- the fuses of the electrical system have been completely unscrewed,
or
- the plug (if present) has been removed from the socket.
Always hold the plug, never pull the cord.
- If the hob is equipped with a communication module, make sure
that the module is disconnected from the mains during installation,
maintenance or repair work.
Correct use
- In the event of overheating, greases and oils can ignite easily.
Always stay in the vicinity of the appliance when using greases and
oils.
Never put out fires caused by oil or grease with water. Switch off the
appliance and carefully smother the flames with a lid or fire blanket.
- Flames could ignite the grease filters of the extractor hood. Do not
prepare flambé dishes under the extractor hood.
- Do not use the hob to prepare preserves or to heat cans. Cooking to
prepare preserves or heating closed tins can result in bursting due to
overpressure.
SAFETY INSTRUCTIONS AND WARNINGS
