background image

E2904i Induction Boiling Table

USER INSTRUCTIONS

Section 1 – 

GENERAL DESCRIPTION

Section 2 – 

SAFETY and OPERATION

Section 3 – 

COOKING HINTS

Section 4 – 

MAINTENANCE and CLEANING

IMPORTANT

This appliance must be installed by a competent person in compliance with the regulations in force at
the time.
Regular servicing by a qualified person is recommended to ensure the continued safe and efficient
performance of the appliance.

WARNING

PERSONS WITH PACEMAKERS SHOULD CONSULT THEIR G.P. BEFORE OPERATING THIS
APPLIANCE. THIS UNIT OPERATES AT 20KHz AND THIS MAY AFFECT OLDER TYPES OF
PACEMAKER.

Upon receipt of this manual, the installer should instruct a responsible person (or persons) as to the
correct operation and maintenance of the unit.
The equipment is designed for PROFESSIONAL USE and should only be operated by QUALIFIED
persons. It is the responsibility of the supervisor or equivalent to ensure that the user wears SUITABLE
PROTECTIVE CLOTHING. Attention should also be drawn to the fact that some parts of the appliance
may become VERY HOT and could cause burns if touched accidentally.

WARNING - THIS APPLIANCE MUST BE EARTHED

WEEE Directive Registration No. WEE/DC0059TT/PRO

At end of unit life, dispose of appliance and any replacement 
parts in a safe manner, via a licenced waste handler.
Units are designed to be dismantled easily and recycling of all 
material is encouraged whenever practicable.

Falcon Foodservice Equipment

HEAD OFFICE AND WORKS

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.

SERVICELINE CONTACT

Phone: 01438 363 000

Fax: 01438 369 900

T100656 Ref.1

Summary of Contents for E2904i









Reviews: