Loewe bild 1, User Handbook Manual, Page: 24 / 227

Loewe bild
User handbook
24
„
Initial installation
Setting options for DVB-T reception:
If you have not selected Terrestrial (DVB-T) in step Connect
antenna cable(s) in the initial installation, proceed to the next section
Setting options for DVB-C reception .
If several networks are available via DVB-T, you can
decide which network you want to receive your
channels from.
Select network,
OK Confirm selection.
Proceed to next step.
Select and adapt settings for DVB-T reception.
OK Confirm selection.
Scrambled
channels
You can state whether coded channels are to be
searched for in the search/update.
Select
yes to save all found scrambled channels.
However, these channels can only be received in
connection with a CA module and the appropriate
Smart Card.
The handling of the CA module is described in the
chapter
System settings , section Extras – CA
module .
Accept
Logical
Channel
Number
In various countries, digital channels (DVB-T) are
transmitted with a preset channel number per chan-
nel, known as Logical Channel Numbers (LCN).
If you select yes here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The channels in
the channel list can no longer be shifted.
Network
selection
Settings
Supply
voltage
DVB-T
antenna
Select supply voltage no (0V) / yes (5V) .
If you use a DVB-T antenna that requires a supply
voltage (active antenna) and which is not already
supplied via a power adaptor, then select
yes (5V)
for the antenna’s power supply.
How to align your DVB-T antenna is described in
chapter
System settings , section Connections
– Antenna DVB .
Proceed to next step.