Loewe bild 1, User Handbook Manual, Page: 107 / 227

Loewe bild
User handbook
107
„
System settings
Control
Manual update via the Internet
If an Internet connection is available, new software can be downloaded
directly and installed onto the TV set.
Calling Software update
HOME: Call Home view.
Mark System settings ,
OK call System settings.
Mark Control ,
go to next column.
Mark Software update ,
go to next column.
Mark Via Internet ,
go to next column.
You will see a message on the screen regarding
data protection.
If you are not in agreement with the relevant data being
passed on:
Exit the update process.
The update will then not be carried out.
Otherwise: Confirm data protection message by press-
ing .
The version of the software package that is currently
installed will be displayed.
Proceed .
The TV set connects to the Internet and scans the
update server for new software.
If a new software version is available after the search, an
on-screen message appears (see right hand column).
If no new software package was found in the search:
BACK: End of wizard .
New software package found
Proceed starts loading of the new software.
Or:
End of wizard .
The update will then not be carried out.
Load new software package
Only the parts of the software package that are not up
to date will be automatically downloaded from the
Internet and updated.
Each part of the software is downloaded individually
from the Internet and is then programmed.
The total time required for all the software parts to be
downloaded from the Internet is dependent on the
speed of data transfer that is being used.
The total programming process can take up to 50
minutes in total.
Please do
not switch off your TV set with the mains
switch during the entire loading and programming
process.
After the update, the TV set is automatically powered
off and on again.
Depending on the software loaded, it is possible that
the device may not turn off automatically after the
update. Therefore, please supervise the update
process.
When the TV set is switched on again, a message is
displayed.
BACK: End of wizard .
... ...
New software
A new software version was found.
New software: V4.4.34.0 (Current software: V4.4.31.0)
If you now wish to load the new software, press the button. Otherwise
close with the button.
Ensure that the TV set is not switched off at the mains while it is loading the
data.
A new software version was found.
New software: V4.4.34.0 (Current software: V4.4.31.0)
If you now wish to load the new software, press the button. Otherwise
close with the button.
Ensure that the TV set is not switched off at the mains while it is loading the
data.
Start update
60%
...
-NSD3GDKN@CHMF@MCOQNFQ@LLHMFOQNBDRRB@MS@JDTOSN@OOQNWLHMTSDR
in total. Please do not switch off your TV set at the mains during this time.
Note: The TV set will automatically restart after programming. You will then be
informed about the end of the programming in a dialogue.
-NSD3GDKN@CHMF@MCOQNFQ@LLHMFOQNBDRRB@MS@JDTOSN@OOQNWLHMTSDR
in total. Please do not switch off your TV set at the mains during this time.
Note: The TV set will automatically restart after programming. You will then be
informed about the end of the programming in a dialogue.
Updating software
The "V1.1.14.0" software is currently being programmed, please wait ...
Start update