Loewe bild 1, User Handbook Manual, Page: 143 / 227

Loewe bild
User handbook
143
Connecting a DVD player to the TV set
A DVD player has been selected in the System settings
ט
AV
connecting settings
ט
Device at connection AV .
Switch off all devices before connecting them.
Connect the Scart output of the DVD player to the TV set’s AV socket
using the Scart adaptor
(1
.
Use a fully equipped Scart cable (available from your dealer) for this.
Playback from AV device
If the device at AV supports the Digital Link Plus functionality or if in
the
System settings
ט
Connections
ט
AV connecting settings
ט
Allow switching voltage
ט
yes , the TV set will automatically switch
to the corresponding AV input after starting the replay at the AV device.
The AV input can also be called manually, however.
Call Sources .
Select AV ,
OK switch over.
Start playback on the connected device.
Connection example of a DVD player
„
External devices
(1
Adaptor is available as an accessory (see chapter Accessories ).
Devices on AV
The AV connection socket offers the possibility to connect e.g. a DVD
player, video/DVD recorder or PC via two different adapters.
The required adapters (Scart or VGA adapter) are available as an
accessory from your Loewe dealer (see chapter
Accessories ).
The AV sockets can process different signal types. Which signal type
your accessory device provides can be found in the operating manual
of the appropriate device.
Owing to the large number of AV devices available on the market, we
can only mention a few examples for the connection of accessory
equipment to the AV socket here.
Remote TV switch on via Digital Link
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a
Digital Link Plus-enabled device connected to AV .
You can find the settings in the System settings
ט
Connections
ט
Digital Link
ט
Remote switch on of the TV set .
AV
AV
DVD player
TV set