Loewe bild 1, User Handbook Manual, Page: 110 / 227

Loewe bild
User handbook
110
„
System settings
Control
On-screen displays
You can select different settings in this menu which affect the on-
screen displays.
Call On-screen displays
HOME: Call Home view.
Mark System settings ,
OK call System settings.
Mark Control ,
go to next column.
Mark more ... ,
call other settings.
Mark On-screen displays ,
go to next column.
Select desired setting and make changes.
OK Adopt settings.
Explanations of setting possibilities in the On-screen displays
menu:
Display time Here you set the duration of the display, e.g. for the vol-
ume or the channel display when changing channels.
Volume
display
Here you set whether a volume change is also to be
indicated visibly on the screen.
Automatic
menu info
Herewith you activate/deactivate the info text
displays for the currently selected menu item.
Key
explanation
If yes is set, the assignment of special remote control
keys is indicated together with the TV status display.
Permanent
clock display
The time display can be permanently shown. It is
always visible as long as no other display is made.
Automatic
HDMI hint
If yes is set here, a message about the adapted func-
tion of the remote control is shown whenever you
switch over to an HDMI channel position to which a
Digital Link HD capable TV set is connected.
Upper info
display
This activates the upper additional on-screen display
in the status bar when switching stations on or off.
„No Signal"
notification
This allows you to suppress the ‘No signal’ message.
Switch off
curtain
Here you can specify whether there is a switch-off
curtain (0 = no curtain) and how long this one needs
for closing.
Radio screen If on is set here, the screen remains permanently swit-
ched on in radio mode. When off after 30 seconds/1
minute/2 minute , the screen is switched off.
Time and date
The time and date are normally acquired automatically by the TV
set. If the data is missing or wrong, you can adjust it via the time and
date menu.
Call Time and date
HOME: Call Home view.
Mark System settings ,
OK call System settings.
Mark Control ,
go to next column.
Mark more ... ,
call other settings.
Mark Time and date ,
go to next column.
Select desired setting and make changes.
OK Adopt settings.
Explanations of setting possibilities in the Time and date menu:
Data capture If you need to set the time and date entries manually,
turn off the automatic setting here.
Time zone The current time at the Greenwich Meridian 0 is to be
understood as world time. The time shift in relation to
this time must be given in hours (–11 to +13).
Changeover
summer time
/ winter time
If the summer time in your country is changed to
Daylight-saving time, select
yes please.
Beginning of
daylight-
saving time
Enter the date on which the time is switched over to
summer time if it deviates from the automatically
calculated date. This menu item appears only if
yes
was selected for Daylight-saving time.
Only possible when changeover summer time/
winter time – yes has been selected.
End
of daylight-
saving time
Enter the date on which the summer time ends if
it deviates from the automatically calculated date.
This menu item appears only if
yes was selected for
Daylight-saving time.
Only possible when changeover summer time/
winter time – yes has been selected.
Time
Date
Enter the time (00:00 to 23:59) / date (day.month.
year) with the numerical keys of the remote control.
Only possible when Data capture - off or when
time has not been automatically acquired.