llaza WINBOX-350, Technical Manual

Page: 17 / 20

Page 17 - Copyright Llaza, S.A. - May 2012
WINBOX-350
Installation of the awning
7. FINAL ADJUSTMENT OF THE INCLINATION
3
B
4
By using the allen key (3) inserted into the rack
bolt, the height of each arm can be adjusted in
order to obtain the desired and accurate level.
To work correctly, the bolts (B) must first be
slightly loosened. It is essential that these are re-
tightened once the adjustment process is com-
pleted.
As a final step in the installation, use pressure to
attach the side covers for the cassette
(4) .
For the exit point for the motor's power cord, drill
through the cover, always from the bottom, and
insert the rubber insulating cable grommet.
IMPORTANT
To prevent accidental detachment of the side caps,
an attachment screw is included
(5) , which screws
into a threaded tower (6) in the cap.
This screw is made of polyamide, so that if the mo-
tor malfunctions with the cassette closed, the cap
can be pried off to provide access to the motor for
replacement.
6
5